Naoh Sodium Hydroxide Heat Exchanger Hydroxide Fluids Cooler Hastelloy Plate Heat Exchanger

• After-sales Service: Online Service
• Warranty: 1 Year
• Certification: CE
• Model NO.: PL-SH50
• Application: Heater, Cooler, Condenser
• Principle: Mixing Heat Exchanger
• Style: Plate Type
• Material: Stainless Steel
• Heat Exchanger Type: Plate Heat Exchanger
• Usage: Sodium Hydroxide
• Plate Material: AISI304/316/Titanium
• Gasket Material: NBR/EPDM/EPDM-Ht/FKM
• Plate Pattern: Chevron Pattern
• Channel Gap: 3mm-6mm
• Medium: Water / Waste Water
• Frame: Carbon Steel
• Plate Thickness: 0.5mm / 0.6mm
• Flow Rate: 5 M3/H - 300 M3/H
• Transport Package: Wooden Case
• Specification: Plate type heat exchanger
• Trademark: Propellent
• Origin: China
• HS Code: 8419500090
• Production Capacity: 5000pieces/Year
• Package Size: 130.00cm * 50.00cm * 110.00cm
• Package Gross Weight: 280.000kg

Product Description

Naoh Sodium Hydroxide Heat Exchanger Hydroxide Fluids Cooler Hastelloy plate heat exchanger

Product Description

Product Overview
Propellent Plate heat exchanger consists of a pack of corrugated metal plates, gaskets and a fix frame. The plate pack is assembled and fixed on the frame by tightening bolts. The heat is transferred through the plate between the channels which are sealed by gaskets. Our large selection of plates,plate patterns, and pressing depths enables us to cover all thermal duties with solutions that match the requirements perfectly. Propellent can be able to offer a full range of heat exchange design calculation in full working condition.

We have accumulated rich experience in heating, cooling and waste heat recovery for complex process mediums. Propellent never views separately in the selection of heat exchange equipment applications, but put it in the whole process production line, Therefore, we find the best balance to consider the whole initial investment in equipment and long-term operating costs. We optimize manufacturing processes of our clients and reduce the use of fresh energy to provide our customers maximum value when we find reasonable main points in high heat transfer efficiency and pressure loss.

Product Description

 

Ties bolts and connections

Connections can be made the range from DN25 to DN500. The tie bolts are designed to be tightened from the head side of the plate heat exchanger.

Product Parameters

 

Working Principle 
Passing energy from one media to another in order to either heat up or cool down the media, is the basis of heat transfer. Plate heat exchangers use highly efficient flow plates to achieve the heat transfer and are superior to tubular heat exchangers and other plate heat exchanger designs in terms of heat transfer efficiency, space requirements and ease of maintenance.

 

Propellent Plate Heat Exchanger
Plate Type	Single plate
Flow Channel Between Plates	3.5mm ~12.0mm (Optional depends on working condition)
Plate Thickness	0.4mm ~ 1.0mm
Heat Transfer Plate Material	Stainless steel - 304/304L, 316/316L, 254 SMO, Titanium, Hastelloy C-276, others
Gasket Material	NBR, EPDM, HNBR, HEPDM, NBR-HT, FKM-A,FKMG
Pressure Plate Material	Carbon steel, stainless steel and others on request
Temperature Range	-50ºC ~ +180ºC Varies with the media and gasket selection.
Maximum Pressure	Maximum standard pressure 10 bar / 16 bar
Port Connection	DN32, DN50, DN80, DN125, DN150, DN200, DN250, DN350

Plate Pattern

 

The media flow through the channels of the pattern that is pressed into the heat transmission area of each plate. As such, the patterns have great impact on the heat transfer efficiency of the heat exchanger and must be carefully chosen to accommodate the specific requirements of each thermal duty.

The sized of the needed heat transmission area can be reduced if a higher amount of the pressure drop is used. This makes it important to use the allowed pressure drop to the fullest. Some patterns only use a low pressure drop, but offer a lower level of turbulence, while others offer high turbulence in exchange for a high pressure drop. Other patterns have very deep channels, making them suitable for high-viscosity media and media that cause fouling.
 

Plate Material	Available Medium
AISI304, AISI316L	Pure Water, Fresh Water, Mineral Water
Titanium	Sea Water, Mineral Oil, Vegetable Water
254SMO	Dulute Sulphuric Acid etc.
Ni	Caustic Soda with high temperature and concentraction
Hastelloy	Concentration Sulphuric Acid etc.

 

Gasket Material	Temperature Range(ºC)	Hardness	Available Medium
NBR	-20 to 110	-75+/-3	Water, Oil, Acid etc.
EPDM	-30 to 150	80+/-5	Steam, Ammonia, Acid, Glycoletc.
NBR-HT	-30 to 160	85+/-5	Mineral Oil, Thermal Oil
EPDM-HT	-30 to 180	85+/-5	High Tempearture Water
FPM	-55 to 220	80+/-5	High Temperature Oil

 

Production

Applications

Alumina    Beer   Beverage   Chemical   Dairy   Data center  Marine  Milk    Oil and Gas  
Paper-pulp  Petrochemical   Pharmaceutical   Power-plant   Refrigeration   Waste water

Company Profile

Shandong Propellent Energy Technology Co., Ltd was founded in 2014. We are specialized in heat transfer products. We have rich experience in the field of heating, cooling and energy recovery for a variety of industries. Developed to meet exacting specifications, we deliver a wide range of heat exchange solutions suitable for a broad range of applications. Our main products include heat exchangers, heat exchanger gasket, heat exchange systems and heat-recovery systems. We consistently engage in the research and development the cutting edge custom solutions, with the aim of reducing the operating cost of heat utilization. The industries include the chemical industry, food and beverages, the heavy industry, marine applications, the oil and gas industry, refrigeration technology, sugar and transportation.

Packaging & Shipping

Propellent service

Design/Calculate/Data/Drawings
12 months free warranty and life-long maintenance
Training and Operation Manuel
Top quality, Competitive price, Fast fedback
Package details: standard export plywood case & carton & customizing according to your requirements.

Any requirement and questions, Feel free to contact us!