SS316 Wide gap plate heat exchanger using for sugar molasses high viscosity fluids
Propellent Plate heat exchanger consists of a pack of corrugated metal plates, gaskets and a fix frame, the plate pack is assembled and fixed on the frame by tightening bolts.
The heat is transferred through the plate between the channels which are sealed by gaskets. Large number of corrugations of the metal plate are formed by different molds to applicable various industries. The plate corrugations promote turbulent flow of fluid and support the plates against different pressure.The movable frame allows the equipment to adjust (add or remove) the plates to meet the heat duty.
The Main Applications of Plate Heat Exchangers in Wastewater Treatment
1. Application in sewage treatment
Installing the plate heat exchange system on the ground can extract heat from the sewage and pump it to a higher temperature. Because the sewer is located near residential buildings, it can be supplied to heating providers or community residents at short distances.
2. Application in sewage treatment plants
In sewage treatment plants, plate heat exchangers can be used to replace the heat in the wastewater, providing a heat source for the dryer that processes sewage sludge, ensuring that the sludge is in a dry state all year round, and reducing costs for the sewage treatment plant.
3. Application in industrial wastewater treatment
Plate heat exchangers can also extract heat from industrial wastewater like domestic wastewater,
and the recovered energy can be reintroduced into the process sections that require heat in industrial production. This can reduce energy loss and waste, shorten the length of the entire production line, improve production efficiency, and reduce production costs.
Working Principle
Passing energy from one media to another in order to either heat up or cool down the media, is the basis of heat transfer. Plate heat exchangers use highly efficient flow plates to achieve the heat transfer, and are superior to tubular heat exchangers and other plate heat exchanger designs in terms of heat transfer efficiency, space requirements and ease of maintenance.
We supply a wild range of heat exchange products. Which include plate heat exchangers, shell tube heat exchangers, brazed plate heat exchangers, plate type condensers, wide gap plate heat exchangers, welded plate heat exchangers, heat-exchange units, plate type evaporators, air coolers air-handling system, water cooling equipment, waste heat recovery integration device, etc. The application scope covers HVAC, chemical, food and beverage, sugar, metallurgy, power, paper, textiles, shipping and refrigeration, etc.
Plate Pattern
The media flow through the channels of the pattern that is pressed into the heat transmission area of each plate. As such, the patterns have great impact on the heat transfer efficiency of the heat exchanger and must be carefully chosen to accommodate the specific requirements of each thermal duty.
The sized of the needed heat transmission area can be reduced if a higher amount of the pressure drop is used. This makes it important to use the allowed pressure drop to the fullest. Some patterns only use a low pressure drop, but offer a lower level of turbulence, while others offer high turbulence in exchange for a high pressure drop. Other patterns have very deep channels, making them suitable for high-viscosity media and media that cause fouling.
| Propellent Plate Heat Exchanger |
| Plate Type |
Single-pass plate |
| Flow Channel Between Plates |
3.5mm ~12.0mm (Optional depends on working condition) |
| Plate Thickness |
0.4mm ~ 1.0mm |
| Heat Transfer Plate Material |
Stainless steel - 304/304L, 316/316L, 254 SMO, Titanium, Hastelloy C-276, others |
| Gasket Material |
NBR, EPDM, HNBR, HEPDM, NBR-HT, FKM, Viton-A, Viton-G |
| Frame Material |
Carbon steel, stainless steel and others on request |
| Temperature Range |
-50ºC ~ +180ºC Varies with the media and gasket selection. |
| Maximum Pressure |
Maximum standard pressure 10 bar / 16 bar |
| Port Connection |
DN32, DN50, DN80, DN125, DN150, DN200, DN250, DN350 |
Application
About us
Propellent, as the promoter and one of the leaders of effective heat exchanger technology, has been designing and manufacturing heat exchangers for decades of years. Propellent offers a full range of heat exchangers and heat transfer services in all type of industries. To achieve high efficiency at low operating costs, greater application possibilities at a lower investment cost. Customized solutions are provided to match the requirement of customers.
We also offer abundant types of replacement parts for plate heat exchangers, these spare parts apply to international brands in all direction, such as AlfaLav, GEA, APV, Sondex, Tranter, Vicarb, Hisaka, API etc, to meet our clients' demand all over the world.
Propellent service
Design/Calculate/Data/Drawings
12 months free warranty and life-long maintenance
Training and Operation Manuel
Top quality, Competitive price, Fast fedback
Package details: standard export plywood case & carton & customizing according to your requirements.
Any requirement and questions,Feel free to contact us!
F&Q
1. Are you factory?
Yes,we are one of the largestheat exchanger manufactory in China.
2. Are there any discount for the heat exchangers?
Yes. Bigger quantity will enjoy lower discount!
3. What information needed if I want a quotation?
Please advise us the Type of heat exchangers, Material , Heat Exchanger Capacity, Heat Transfer Area, Liquid Flow and Temperature in and out, Quantity, or any requirements in size.
4. What is the MOQ? We accept loose quantity order,mixed order,any trial orders.
5. When can I get the price? We usually quote within 2 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your email so that we will regard your inquiry priority.
